20-160mm Electrical Plastic PVC Pipe Machine / Production Line
The maximum pipe diameter this line can produce is 160mm. This
production line can be equipped with SJZ series conical twin screw
extruder or parallel twin screw extruder. The haul off machine has
two-way, three-way,four-way, six-way type. The cutting machine has
blade saw cutting and planetary cutting method. We also supply all
kinds of PVC moulds.
|1||SJSZ-65/132 conical twin screw extruder||unit||1|
|2||Mould(ordered as per ur requirement)||unit||1|
|3||SZGL-160 vacuum calibrating water trough||unit||1|
|4||SLQ-160 petrail puller||unit||1|
|7||electric control device||unit||1|
The technique Parameter
1) ZS SJ conical twin screw extruder
Screw number: 2 pieces
Screw valid length:1440mm
Screw rotation speed: 1-34.7r/min
Screw spiral direction: reverse outside at undirection
Material of barrel and screw: 38 CrMoAIA, treated by nitrogen
Depth of nitrogen: 0.5-0.7mm
Hardness of nitrogen:900-1000HV
nrittle of nitrogen: ≤one grade
Coarse degree at surface:Ra0.4
Reducer box/distributor: hard gear-surface
Heater: cast-aluminum heater(cooled by fans)
- extruder: adopting conical twin-screw extruder, unique designed
screw, realizing shorting plasticizing time, good compounding and
- gearbox: adopting super quality gear box and reducer, with nice
outline, stable running, low noise and long service time.
- extruding barrel temperature controlling system: adopting cast
aluminum heaters with stainless steel covers, wind cooling system,
ensuring good features of cooling and heating, precision
- screw and barrel: screw-core installing with internal temperature
controlling system, barrel equipped with vacuum degassing system,
can get rid of the waste gas from the raw material which can
guarantee super quality of the products.
- driving system: adopting A.C motor, using FUJI or ABB inverters
which provide stable torque output and various speed.
- vacuum calibrating tank: with two vacuum chambers which can make
sure the perfect roundness of the pipe, spraying water cooling,
equipped with temperature controller, realizing automatic
discharging the water, the main body of the tank make of stainless
steel, long service time.
- haul-off machines: 2 laws, 3 claws, 4 claws, 6 claws and 8 claws
are provided to manufacture various pipes, haul-off speed governed
by the FUJI or ABB inverter.
- cutting unit: saw cutting and planet saw cutting, with dust
- staking unit: automatic overturning system, can freely fix the
length of the pipe.
- controlling system: manual controlling cabinet or SIEMENS PLC touch